Solid Particles (cigarette Smoke) Generator

Product Detail

                      FSQ-YW-001 Solid particles (cigarette smoke) Generator

 

 

1.Structural features

As shown in the figure, the generator consists of several major components, such as chassis, combustion chamber window mechanism, air pump, flowmeter, switch button, cigarette lighter, circulating pump and filter, CPU board and power board. The chassis ,made by thin stainless steel , was producted by bending, assembled and welded process. The surface , baked with white paint had been deal with derusting processing.

2. Working method

The generator adopts a positive pressure air blowing method to generate smoke. The cigarette is fixed on the cigarette holder which is connected to the combustion tube. The cigarette is ignited by the cigarette lighter. At the same time ,the time counting starts. The cigarette will burn up within (40-50) s .The solid particulate matter (cigarette smoke) is introduced into the test chamber through the smoke outlet tube at the tail of the mouthpiece. After the cigarette burns out, the machine will close the intake pump and shut off the smoke output. Then it will start the circulating gas pump and filter the residual smoke in the Combustion chamber.

3.Technique parameter

Generator flow range:1-5L / min

Generating frequency:40 ~ 50/Sec.

Power Supply: AC, 220V / 50Hz

Maximum power consumption:100W

Weight:7kg

Dimensions :360×270×400H mm